Stop brewing or steaming when water escapes onto the counter, under the machine or toward electrical equipment. Keep people clear of hot water, steam and wet plugs or controls. Use only the actual machine’s understood stopping instructions with dry, safe access; request urgent qualified help if water continues or safe stopping is uncertain. Contact its manufacturer or qualified appliance service. Water contained entirely in the intended drip tray can be normal on some models, but it does not explain an exterior puddle. Do not run another shot, loosen the brewing handle or lift the machine to find the leak.

Stop ordinary use before handling the machine
Keep children, pets and other people clear of the affected counter and any wet floor. Do not put a hand into the flow, lean over steam or lift the appliance to look underneath. If there is fire, sparking, serious injury or immediate danger, leave and call 911 from safety. The model number can wait.
Follow the actual machine’s known stopping instructions only if the controls and access are dry and safe. Do not guess at button combinations, unplug a wet cord or cross standing water to a breaker. CDC warns against operating power or electrical equipment while standing in water. Request urgent qualified help when safe stopping or isolation is uncertain.
The current Breville BES870 manual warns against opening the brew chamber or removing the portafilter during brewing, and requires cooling before moving or cleaning parts. Keep those heat and pressure hazards separate from an off display. A quiet pump does not establish that handling, cleaning or repair is safe.
Describe the machine and the water location separately
Use an existing receipt, manual or equipment record for the full model and any suffix. Report whether it is a refillable countertop machine or an installed machine with a plumbing connection, if already known. Leave this unknown rather than pulling it forward, reaching behind it or opening a cabinet near wet electrical equipment.
Describe the first location already observed: inside the intended tray, around the brewing handle, beside the removable reservoir, beneath the housing or on the counter edge. Include whether brewing, steam or hot-water use was already happening. Do not start a new cycle, refill a reservoir or run a purge to reproduce the symptom.
An installed instant-hot-water tank and its sink faucet have a different water path and service plan; use that separate guide for that equipment. For a suspected household supply connection, involve a plumber or building contact as well as appliance support. Do not assume that an espresso-machine appointment includes the surrounding plumbing or electrical work.
Separate routine drip-tray care from an exterior leak
For the Barista Express BES870 Series, the current USCM–X26 manual describes automatic water discharge into the drip tray after espresso, hot-water and steam functions. That explains intended collection on this named model. It does not establish that water beneath a housing, outside the tray or on the floor is normal. Other machines need their own instructions.
For routine care of a matching, otherwise normally operating machine with no exterior leak, malfunction or electrical exposure, follow the complete manual’s safety and tray instructions. This manual calls for switching off, unplugging and cooling before cleaning; its tray-care section specifies emptying, hand washing with gentle dishwashing liquid, rinsing and thorough drying. Use the illustrated assembly instructions for the actual tray. Do not turn this routine-care task into an active-leak test.
If water escaped, or you cannot distinguish normal collection from a fault, keep ordinary use stopped and ask support which finding resolves it. Report a tray indicator or recent care already observed. Do not pick a seal, reservoir or internal component as the cause from a troubleshooting list, tighten the brewing handle under pressure or start descaling/backflushing to see whether leakage disappears.
Use the first call to assign the next decision
Use this original table with the actual manufacturer, appliance provider and any separate plumbing or electrical contact. Describe immediate hazards and continuing water first. A safe existing photo may help; do not move equipment or delay urgent help to obtain one.
| What is already known | Question or next contact |
|---|---|
| Hot spray or unsafe access | What urgent safe stopping or isolation help is needed? Describe the danger before discussing parts. |
| Water only in the intended tray | Does the exact manual identify this collection as normal, and which routine care applies? |
| Water outside the tray or housing | Manufacturer or qualified appliance service: what finding identifies the escaped-water source? |
| Actual plumbing connection involved | Who assesses that connection and its safe water control? Include a qualified plumber or building contact. |
| Cord, outlet or controls exposed | Who performs the qualified electrical assessment before use? Keep clear and do not reset or test. |
| Repair proposed or reported complete | What was found, what work was completed, and who gives the specific return-to-use instructions? |
Close the appliance, electrical and wet-material tasks separately
Breville’s current service route asks for product identification and purchase records, then Consumer Support instructions. Use records already available; a label underneath a wet machine is not a reason to tilt it. Ask about service arrangements and any proposed owner task for the actual model and condition. Do not assume coverage, a replacement part or a shipping plan has been approved.
When electrical equipment was exposed or its condition is uncertain, keep it out of use pending the appropriate qualified assessment. ESFI warns that drying alone does not make water-damaged equipment safe. Coordinate manufacturer/appliance service and electrical help; an appliance repair finding and a safe receptacle are separate questions. Do not try another outlet, reset a protective device or use a hair dryer as clearance.
Arrange prompt attention to affected counter seams, cabinet edges and flooring. EPA advises correcting water problems and drying items completely, with experienced help for contaminated-water damage. Report suspected concealed wet areas or swelling. Do not reach under a hot or potentially energized appliance to mop up, or treat a dry towel, stopped drip or dry-looking surface as completion of the repair and material work.
Example: the tray contains water and the counter is wet
Fictional example: a household notices water in its espresso machine’s tray after ordinary use, then sees a puddle beneath the machine. It stops ordinary use through its known safe instructions, keeps the affected counter clear and contacts the manufacturer from a dry location. If the controls or power connection cannot be approached safely, urgent qualified help takes over.
Its report says “tray water and exterior counter water; starting point unknown.” The household does not assume that automatic collection explains the puddle, pull the reservoir out or brew another cup to compare the amount. Existing paperwork supplies the model without turning the machine over.
The household records the provider’s actual finding and completed work, specific instructions for reuse and any separate electrical or cabinet follow-up. This invented example illustrates a useful service handoff. It does not diagnose a tray, seal or tank, guarantee a warranty outcome or establish a universal restart sequence.
Keep a short private machine and repair record
Make urgent calls first. Use the free homeowner checklist for the responsible contact and next action, and retain detailed product records, service reports and photos privately. Unknown is a useful entry when a field would require unsafe access.
- Full model and suffix from existing records; purchase or prior service record: ___.
- Refillable reservoir or actual plumbing connection, if already known: ___.
- First water location, discovery time and operation already underway: ___.
- Hot spray, wet electrical equipment or access uncertainty: ___.
- Water continuing, stopped or uncertain; no repeat cycle: ___.
- Safe stopping action already taken and who gave the instructions: ___.
- Provider finding, actual completed work and specific reuse restrictions: ___.
- Separate electrical, counter/cabinet/floor work and next contact: ___.
When to call a professional
Leave for fire, sparking, serious injury or immediate danger and call 911 from safety. Continuing water, hot spray or unsafe access needs urgent qualified help. Use the actual manufacturer or qualified appliance service for the machine; involve a plumber for an actual plumbing connection and qualified electrical help for wet electrical equipment. Keep housing, hot or pressurized parts, internal repair and uncertain stopping or restart instructions with the responsible qualified provider.
Related guides
Sources
- Breville US: Barista Express BES870 — current model and linked instruction manual
- Breville: BES870 Series USCM–X26 instruction book — English safety, controls, collection, care and troubleshooting (PDF)
- Breville US: Warranty & Repairs — model/receipt information and Consumer Support handoff
- CDC: Reentering Your Flooded Home — standing-water electrical boundary
- ESFI: Water-Damaged Electrical Equipment — qualified evaluation before reuse
- EPA: Mold Cleanup in Your Home — prompt source correction, complete drying and contaminated-water help
Free next step
Download the free seasonal maintenance checklist to record observations and follow-up tasks. See the seasonal maintenance routine for more context.
Affiliate disclosure
No affiliate links appear in this guide. If a reviewed recommendation is added, the disclosure will appear beside it.
