Do not drink or wash with water from a flooded private well. Use bottled water or another known safe source and contact your local health department and a qualified well or pump contractor. Keep away from flooded pump equipment and well pits. If contamination is suspected even without confirmed submersion, stop drinking the water and request specific water-use advice. Inspection, needed repair or disinfection, and properly arranged testing come before a return-to-use decision. Boiling does not remove chemical contamination.

Choose safe water while help is arranged
EPA’s flooded-well guidance says not to drink or wash with the water. CDC also advises against drinking well water when contamination is suspected and recommends bottled water or another safe source. Do not taste a sample to see whether it seems normal.
Tell everyone using the property about the concern, including guests or the responsible building contact. Ask the health department for instructions covering drinking, food preparation, ice, brushing teeth, washing and bathing, plus any particular household needs. If the safe supply is inadequate, ask local emergency services about available water assistance rather than improvising treatment.
Confirm whether the home uses a private well, public water or a shared supply from existing records. A public utility’s lifted advisory is not a test result for a separate private well. This guide addresses a private well affected by flooding or suspected contamination after a flood.
Contact the health department and the well contractor
Start with your local or state health department for water-use, contamination and testing advice. Contact a qualified well or pump contractor for the damaged or flooded installation. CDC recommends contractor-led well work after a disaster because it can be hazardous. Make clear that this is a flood-related concern rather than a routine pump appointment.
Give the property location, any known flood exposure and immediate access hazards. Say what is unknown. You do not need to reach the wellhead, open a cap or photograph submerged equipment before calling. Use records and observations already available safely.
The original table below separates the questions by the help needed. It is a conversation aid, not a requirement to arrange a particular set of services for every well.
| Question to resolve | Contact or next step to clarify |
|---|---|
| What water can the household use now? | Health department: explain the flood and any chemical concern; request specific restrictions and a safe alternative supply plan. |
| Is access or equipment unsafe? | Well/pump contractor and appropriate emergency or electrical help: report flooded controls, damaged equipment or unsafe access without approaching. |
| What inspection and work are needed? | Well contractor: ask what will be inspected, what damage is found and what repair or disinfection is proposed. |
| Which tests fit this event? | Health department and state-certified laboratory: identify the locally relevant germs and chemicals, rather than selecting a generic kit. |
| Who arranges the sample, and when? | Laboratory and responsible provider: obtain the sample location, container, collection and timing instructions for the actual work completed. |
| Who explains results and remaining restrictions? | Health department: review the report, unresolved concerns, permitted uses and the follow-up testing plan. |
Keep boiling and disinfection within their limits
CDC distinguishes contamination with germs from contamination with chemicals. Boiling can kill germs, but it does not remove chemicals. CDC says chemically contaminated well water should not be used for any purpose until treated to remove the chemicals. Report known fuel, pesticide or other chemical releases, or a smell already noticed; do not approach or deliberately smell suspect water to investigate.
Do not assume a filter pitcher, normal-looking water or a working softener resolves the event. CDC explains that no single treatment type protects against every problem. Ask the health department and well professional which concerns the proposed treatment actually addresses.
The emergency-well source contains disinfection procedures, but this guide does not turn them into a household bleach recipe. Ask the contractor to address the well, connected plumbing and existing treatment equipment under the applicable instructions. Keep any water-use advice in force until the responsible advice and test interpretation support changing it.
Stay away from flooded equipment and well pits
EPA warns against approaching a flooded well pump because of electric shock. CDC warns against entering a well pit and calls for qualified checking of equipment wiring before power is restored. Do not cross floodwater to reach a switch, reset the pump repeatedly or open controls to identify the problem.
Follow evacuation and reentry instructions. Leave an immediately dangerous location and call 911 for immediate danger, injury or entrapment. Report unsafe power lines, damaged ground and open holes to the appropriate emergency contact from a safe position.
Do not start a pumping or flushing experiment because water has receded. Ask the well contractor who handles isolation, access, electrical assessment and any later restart. Returning pressure or a quieter pump is a separate observation from drinking-water safety.
Arrange testing as part of the recovery plan
CDC recommends a state-certified laboratory and consultation about locally relevant germs and chemicals. Tell the health department about the flood exposure and any known nearby release. A pre-flood annual result describes an earlier sample, not the current event.
Before collecting anything, obtain the laboratory’s instructions and coordinate with the well contractor. Ask who collects the sample, where, in which supplied container, after which completed work and under what timing conditions. Do not send water in an ordinary kitchen jar or choose a date from a general article.
CDC’s emergency guidance includes sampling after disinfection and later follow-up tests. Have the provider and laboratory set the actual plan, including any flushing or treatment-related conditions, rather than treating a fixed wait or the absence of chlorine smell as clearance. Keep the work report and laboratory report together.
Ask what the result does—and does not—answer
Ask the health department to explain the report and what it means for household uses. Keep the sample date, location, tests performed and remaining questions visible. A report answers the tests ordered for that sample; do not turn a bacteria result into a conclusion about untested chemical concerns.
If a result or concern remains unresolved, obtain the next action and continue the advised restrictions. Ask who coordinates additional treatment or testing, who communicates a change in use instructions and when follow-up is due. A completed disinfection visit alone does not answer all those questions.
The return-to-use decision is separate from flood-damage repairs inside the home. A dry basement, repaired pump or paid service invoice does not establish the quality of the water supplied by the well.
Example: the flood recedes and the taps run normally
Fictional example: a household knows that floodwater reached the well area. After it recedes, the taps have normal pressure and the water looks clear. They continue using a known safe alternative and tell the health department about the exposure rather than tasting the water or assuming the pump has solved it.
A well contractor assesses the installation and explains the proposed work. The household asks how the laboratory sample will be coordinated afterward and who will interpret the results, including any locally relevant chemical concern. They keep “equipment work complete” separate from “water-use advice updated.”
This invented example illustrates the handoff. It does not predict a test result, establish a universal disinfection sequence or certify water from another property.
Keep a private water-use and follow-up record
Use the free homeowner checklist for the open task, contact and next update. Keep the property address, well records and full laboratory reports privately. No completed worksheet is required before asking for urgent help.
Use the well-pump cycling guide for a separate change in equipment operation. If water also entered the house, use the basement-water and wet-material guides for those repairs. Neither replaces the well-water assessment.
- Private well identity and flood exposure already known; uncertainties: ___.
- Current safe alternative supply and household water-use advice: ___.
- Health-department contact, well contractor and next update: ___.
- Known nearby contamination, damaged equipment or access concerns: ___.
- Inspection findings and actual repair/disinfection work completed: ___.
- Certified laboratory, ordered tests and sample arrangements: ___.
- Result interpretation, current restrictions and follow-up dates: ___.
When to call a professional
Contact the local or state health department for specific water-use, test-selection and result advice; a qualified well or pump contractor for the installation; and a state-certified laboratory for testing. Unsafe electrical or flood conditions need the appropriate qualified or emergency help before access. Do not enter a well pit or attempt disinfection, pump repair or electrical restart from this guide.
Related guides
Sources
- EPA: Protect Your Home’s Water — flooded-well precautions, local advice and testing
- CDC: How to Disinfect Wells After an Emergency — qualified contractors, hazards and sampling follow-up
- CDC: Guidelines for Treating Well Water — suspected contamination, chemical limits and safe alternatives
- CDC: Guidelines for Testing Well Water — state-certified laboratories and locally relevant tests
Free next step
Download the free seasonal maintenance checklist to record observations and follow-up tasks. See the seasonal maintenance routine for more context.
Affiliate disclosure
No affiliate links appear in this guide. If a reviewed recommendation is added, the disclosure will appear beside it.
