Leaks & water

Water Heater Leaking: What to Do First

Keep clear of hot discharge and wet equipment, arrange safe isolation under the actual heater instructions and give the repair service useful information without guessing at a failed part.

The short answer

Keep people away from water, hot discharge and wet electrical equipment. If you smell gas, leave immediately and call 911 or the gas supplier from a safe location; for a CO alarm, get everyone outside and call 911. Otherwise, arrange urgent help from a qualified water-heater professional or plumber. Use the installed heater’s safe energy-and-water shutdown instructions only when access is dry, you are authorized and the controls are already understood. Do not cap a relief outlet, drain the tank or restart equipment to test it.

1. Immediate hazardsKeep clear of hot discharge and wet equipment; gas or CO emergencies take priority.

2. The installed controlsIncoming water, stored hot water and heating energy need the actual safe response.

3. Repair and affected materialsA stopped drip does not establish safe equipment use or completed drying.

Separate response questions. This is not a control sequence or plumbing layout.

First decide whether to leave the area

For a suspected gas leak, leave immediately. Do not light an appliance, operate switches or use a phone near the suspected leak; make the emergency call from well away. PHMSA’s natural-gas emergency guidance supports those spark-avoidance precautions. Do not stay beside the heater to find the source or collect its model number.

For a sounding carbon monoxide alarm, CPSC advises moving outside to fresh air and calling emergency services. Stay out until responders give permission to return. A water puddle does not explain away a CO alarm, and silencing an alarm does not clear the appliance.

Keep children and pets away from the wet area. Do not enter water to reach a breaker, plug or control. CDC says never operate power or electrical equipment while standing in water; have an electrician or appropriate emergency help make uncertain access safe. Leave and call 911 for fire, immediate danger or injury.

Arrange safe stopping before investigating the leak

For a water leak without the emergency signs above, call a qualified water-heater service provider or plumber promptly. Tell them whether water continues and whether safe access to the installed heater’s controls is available. Use the actual energy-and-water shutdown instructions only if they apply to the installed system, you are authorized and you can follow them safely. If any part is unclear or inaccessible, obtain urgent help rather than guessing.

A. O. Smith’s current U.S. GCR-40L 411 page links gas-heater guide 100263112, dated January 2015. Its diagram distinguishes the cold-water shutoff, gas-supply shutoff and relief discharge. This is a model/document example, not a control sequence for electric, heat-pump, tankless or other gas heaters.

The established main-shutoff guide helps you record a known household water control. Closing an incoming-water valve does not itself document safe energy isolation or remove stored hot water. Do not force a stuck valve, change shared equipment or reopen a supply to see whether the leak returns. Ask the responder to handle unknown controls and restoration.

Keep clear of the relief discharge

A temperature-and-pressure relief valve is a safety device. A. O. Smith’s Bulletin 52 explains that its response can involve pressure or very hot water. The gas guide warns against capping or plugging the valve or its discharge pipe. Keep clear of an outlet that is releasing hot water or steam; do not touch the flow to judge its temperature.

Report an already observed large or hot discharge urgently to the qualified service or emergency contact. Do not reduce the problem to “a valve to tighten.” Do not lift a relief lever to test it, attach a cap, replace a valve or adjust pressure as part of this response. A drip pattern cannot tell you which component needs work.

What to tell the water-heater repair service
Situation already observedUseful response or request
Gas smell or a CO alarmLeave first; use the appropriate emergency response from a safe location.
Hot discharge or steam at a pipe outletKeep clear and report the discharge urgently; do not block the outlet.
Continuing water with unknown or unsafe controlsRequest urgent safe isolation and qualified diagnosis.
Water around the heater, with source unclearReport location and timing without touching fittings, opening covers or assuming a tank failure.
Heater or controls were submergedKeep it out of service; tell the manufacturer or qualified service about the water exposure.
Water reached a ceiling, walls or concealed flooringArrange building/material assessment alongside the heater repair.
Water near a separate expansion vesselReport the already-known location and any equipment record; request identification and source assessment without touching or testing it.

Describe the water without declaring a cause

A. O. Smith’s general leak guide discusses connections, valves, tanks and condensation, and recommends the actual manual and authorized service for diagnosis. Those possibilities do not identify the source of water in your home. A pan or drain arrangement also needs its installed instructions; do not assume unexplained water is normal condensate or proof that the tank must be replaced.

From a safe, dry position, report where water was first visible, when it began and any service already performed. Use an existing appliance record for model and fuel information when approaching the label is unsafe. Do not wipe hot components, loosen a fitting, open a cover, drain the tank or run hot taps to reproduce the problem.

If water is beside a separate expansion vessel

A separate vessel serving domestic hot water may be a thermal-expansion tank. Ask the plumber to confirm its identity and the actual leak source. Water first visible below it does not distinguish its body, a connection, the heater or a relief outlet. Leave the name unknown when existing records do not establish it; do not approach hot, wet or damaged equipment to identify it.

Amtrol’s currently linked potable-water expansion-tank manual, Part 9015-942 (07/25), assigns installation, inspection and service to licensed professionals and calls for prompt qualified help for apparent malfunction or corrosion. Its figures distinguish the vessel, heater and relief device. This named-model example does not identify your equipment or supply a household pressure-checking procedure. Do not remove caps, press an air valve, add air, tighten fittings or change support to investigate.

A domestic hot-water expansion vessel is a different service question from the well pressure tank covered in its separate guide, or a heating/solar circuit vessel. Tell the responder which systems are present from existing records. Keep the heater’s energy and stored-hot-water concerns in the response; a closed household valve or stopped drip does not establish safe pressure-vessel work. Ask who will confirm the source, required repair and actual return-to-use instructions.

If equipment was submerged, drying it is not a restart plan

A. O. Smith’s flood-damage Bulletin 0823 says not to operate an appliance that has been under water and calls for replacement of its heaters subjected to flooding or extensive inundation. It warns that concealed components and safety functions may be damaged. Tell qualified service exactly what was submerged; do not interpret this as a replacement diagnosis from any small nearby puddle.

Do not reset a breaker, relight a pilot or restart a water-exposed heater because the outside looks dry. Obtain the actual manufacturer’s instructions and qualified assessment for the affected equipment. Keep appliance decisions separate from drying the room.

Copy this short private repair-call record

Make urgent calls first. Fill in only information already available safely; a photograph or complete label record can wait.

  • Immediate hazard, affected area and safe access: ___.
  • Water first seen at ___, time ___; continuing / stopped / unknown: ___.
  • Heater brand, full model and fuel/type from existing records: ___.
  • Relief outlet, pan, nearby pipe or source uncertain — no touching to identify: ___.
  • Recent installation, service or prior similar incident: ___.
  • Known controls used, who operated them and instructions followed: ___.
  • Any flooding or submerged equipment: ___.
  • Service/building contact and case number: ___.
  • Source repair, safe restart instructions and wet-material follow-up still needed: ___.
  • Separate vessel identity from existing records, or unknown; first visible water location: ___.
  • Provider-confirmed release point, vessel/connection findings and unresolved work: ___.

Example: an alarm sounds beside the heater pan

Fictional example: a basement sensor alarms and a household sees water in and beside the heater pan from the dry doorway. They keep people away and call qualified service. Using the home record, they give the model and report “water around pan; source unconfirmed.” They describe whether water appears to continue without approaching the equipment.

They use only established safe stopping instructions for that installation, or leave isolation to the responder if uncertain. They do not open a drain or assume that a silent sensor after water recedes means repair is finished. If gas smell or a CO alarm occurs, the emergency departure and call take priority over this documentation.

Track repair, safe use and drying separately

Ask what caused the release, what was repaired or replaced, and who provides the instructions for safe return to service. Record any unresolved source, energy-control or water-exposure issue. A bucket, towel, stopped drip or dry sensor does not answer those questions.

EPA advises fixing water problems promptly and drying affected materials within 24–48 hours to help prevent mold. Arrange timely assessment; this is not a waiting period or a guarantee that hidden flooring or walls are dry. Use experienced help for major damage, contaminated water or uncertain concealed wet areas.

Keep drying equipment out of use until electrical safety is established. Put repair and material follow-up on the free homeowner checklist. Before repositioning a detector later, use its actual placement instructions and preserve service access.

If solar thermal equipment also serves the water heater

A solar collector loop, household water and backup heating can involve different fluids and energy sources. In the reviewed Stiebel Eltron indirect-system example, collector fluid transfers heat through a tank heat exchanger. Water around a tank does not identify which circuit released it, and a household water shutoff does not establish safe isolation of the collector loop.

Use the solar water-heating fluid-leak guide when collector piping, a solar station or heat-transfer fluid may be involved. Tell qualified solar-thermal service and the water-heater professional which equipment is present from existing records. Do not copy valve positions, controller settings, refill instructions or a shutdown sequence from a different system; request the applicable safe response and coordinated diagnosis.

Example: water is below a small vessel near the heater

Fictional example: from a dry doorway, a homeowner sees water below the piping near a small vessel. Existing paperwork calls it a domestic expansion tank. They call the plumber with “water below expansion-tank area; source unconfirmed,” the time and any continuing-water concern. They keep clear rather than approaching the vessel to inspect its cap, feel it or check pressure.

They ask the responder to distinguish equipment identification, the confirmed release point and the work required. The service note later records actual findings and use instructions, with wet-floor follow-up assigned separately. The example does not predict a failed tank or a repair outcome.

Important: Researched first-response guidance, not firsthand testing or a water-heater diagnosis. Match energy, water and return-to-service instructions to the installed equipment. Use qualified help for gas, electrical work, hot discharge, unsafe access and repairs.

When to call a professional

Stop and contact a qualified plumber or other appropriate professional if water is actively spreading, you cannot safely find the shutoff, the leak involves a wall or ceiling, or a repair would require changing plumbing.

Related guides

Sources

Free next step

Download the free seasonal maintenance checklist to record observations and follow-up tasks. See the seasonal maintenance routine for more context.

Affiliate disclosure

No affiliate links appear in this guide. If a reviewed recommendation is added, the disclosure will appear beside it.

Back to guide library