If your home’s radon testing history is unknown, arrange a home-specific test using a suitable kit or qualified tester. Start with your state radon program, the device/laboratory instructions and EPA’s testing guidance. Plan the location, required conditions, exposure period, return deadline and follow-up before opening the kit. A completed exposure is not yet a laboratory result, and a result below an action level is not a guarantee of zero risk.

Identify the decision before choosing a test
CDC recommends testing when a home has never been tested or its level is unknown, around renovations, and before changing how a lower level is used. A home purchase or sale is a different testing circumstance: CDC points buyers and sellers toward a qualified tester. Resolve the applicable process before relying on an ordinary owner-testing checklist.
Gather existing reports if available, including the tested area, dates, device and units. “The previous owner tested” is a lead to a document, not a usable result by itself. Ask who can obtain the report and whether the home or its use has changed since then.
EPA’s state-program directory also cautions that a radon-zone map cannot determine whether an individual home needs testing. A low-risk-looking area or a neighbor’s reassuring result does not complete your home’s record.
Choose the pathway, not just the fastest package
CDC describes short-term tests as lasting 2–90 days and long-term tests as lasting more than 90 days. The exact duration belongs to the actual device. A longer measurement is more representative of year-round conditions; it is not permission to delay a prompt follow-up after a high initial result.
| Your situation | Useful next step |
|---|---|
| Routine owner check; history unknown | Ask the state program or qualified tester about an appropriate initial test and its follow-up pathway. |
| Better estimate of year-round conditions | Discuss an appropriate long-term test; keep any already-required prompt follow-up separate. |
| Buying or selling a home | Use qualified guidance for the transaction and its testing requirements. Do not substitute this general planning record. |
| Renovation, lower-level use change or a complex layout | Identify the area or areas that need testing before selecting a single convenient location. |
Check what the kit and laboratory actually require
EPA says test kits may be available from state/local programs, retail sources or National Radon Program Services. Free or discounted availability varies; confirm the actual program rather than assuming a kit is free. Ask which testing or mitigation professionals meet the applicable qualifications in your area.
Before opening a device, read its complete instructions. Confirm the exposure window, preparation, expiration information if provided, registration or paperwork, laboratory handling and return deadline. Check which services and fees are included. A household member should know who will finish and return the test, not just who bought it.
If the kit, state guidance and a generic web article appear to disagree, resolve the procedure with the laboratory or state program before beginning. Do not combine parts of different protocols into a new test method.
Plan the location and household conditions
EPA’s Citizen’s Guide uses a regularly occupied room on the lowest lived-in level for its routine short-term pathway, away from disturbance, drafts, heat and humidity. State programs can add layout-specific instructions. Illinois, for example, describes separate testing in the home’s lowest structural areas rather than averaging results from different areas into one number. Its guidance is a state example, not a rule for every U.S. home.
Use the actual protocol to document the room, permitted height and clearances from windows, doors, walls and objects. Do not place a kit somewhere only because it is hidden or convenient. Resolve multi-unit homes, crawlspace/slab combinations and unclear access with the appropriate program or tester.
Short-term testing can require closed-house conditions before and during exposure. EPA’s guide specifies preparation beginning at least 12 hours before a two- or three-day test and cautions against those very short tests during unusually severe storms or high winds. Ordinary entry and exit is different from leaving windows open.
The instructions also address heating, cooling, ventilation and existing radon-reduction equipment. Do not switch off unfamiliar systems or compromise a safety need to fit a test schedule. Ask the tester how to proceed if the household cannot maintain the required conditions.
Finish the test and its paperwork as separate tasks
Record the start and stop times exactly. Leave the device where instructed for the complete exposure period. For a kit that must be analyzed by a laboratory, use its sealing, paperwork and prompt-return instructions. Retain the device identifier and a private copy or photograph of the completed record.
If a device is moved, the timing is uncertain or required conditions were interrupted, tell the laboratory or tester. Do not silently describe the exposure as compliant. “Exposure ended,” “mailed to laboratory” and “result received” are three different statuses.
- Applicable state/laboratory instructions and test purpose: ___.
- Device identifier, room/area and placement record: ___.
- Required conditions and household person responsible: ___.
- Actual start/stop dates and times, including any interruption: ___.
- Return deadline, date sent and result-delivery arrangement: ___.
- Result, units, tested area, report location and next action: ___.
Use the reported result to complete the follow-up
EPA’s routine pathway calls for follow-up when an initial short-term result is 4 pCi/L or higher. It says a first short-term result above 8 pCi/L warrants another short-term test immediately. Do not choose a months-long wait merely because a long-term test may otherwise be useful. Check the applicable state and laboratory guidance, particularly for elevated or unclear results.
CDC’s follow-up guidance recommends qualified radon reduction when a long-term result, or the average of two appropriate short-term tests, is at least 4 pCi/L. EPA also recommends considering reduction between 2 and 4 pCi/L and states that no exposure level is known to be safe. These are action recommendations, not an individual medical assessment or a universal statement of local law.
Preserve the units exactly as reported. Do not compare a bare number with a pCi/L recommendation if the report uses another unit. Do not average unlike locations, incompatible tests or readings from a different household. Ask the state program or qualified tester to resolve the interpretation and appropriate next step.
Example: a returned kit still needs a result and an action
Fictional example: a household finishes a properly conducted owner test and mails it to the named laboratory. The record first says “Returned; awaiting report.” When the report arrives, it records “Initial short-term result: 5.6 pCi/L,” the tested room, dates and report location. It then records the follow-up arranged under the applicable guidance; it does not mark the radon task complete because the package was mailed.
A separate report from another area stays on a separate row. The household does not average it with 5.6 to make the initial result look lower. This is an invented record example, not a measurement, test-kit endorsement or claim that a particular home has a radon problem.
Keep radon testing connected to the wider home plan
Use the free homeowner checklist’s follow-up area to retain the responsible person and next action. Keep alarm testing and replacement dates in their own record; those entries do not document a radon measurement. If radon reduction is needed, use qualified help and retain the post-work testing record.
Review the testing plan when the home or use of a lower level changes, following current program guidance. This guide helps organize an air-radon test; it does not design a mitigation system, interpret individual health symptoms or cover radon-in-water testing.
When to call a professional
Call emergency services for an immediate danger. For electrical, gas, structural, medical, or hazardous-material concerns, do not rely on a consumer product or a beginner repair attempt—contact qualified help.
Related guides
Sources
- CDC: Testing Your Home for Radon — test types, circumstances and follow-up
- EPA: A Citizen’s Guide to Radon — current hosted PDF, cover marked 2025
- EPA: State radon program contacts and limits of the radon-zone map
- EPA: How to obtain a radon test kit; local availability varies
- EPA: Radon publications — action recommendations and no known safe level
- Illinois IEMA: Guidelines for Radon Measurements in the Home — state-specific layout and result example (PDF)
Free next step
Download the free seasonal maintenance checklist to record observations and follow-up tasks. See the seasonal maintenance routine for more context.
Affiliate disclosure
No affiliate links appear in this guide. If a reviewed recommendation is added, the disclosure will appear beside it.
