Leaks & water

Water From Brick Weep Holes After Rain: What to Do

Understand intended wall drainage, leave unidentified openings alone and coordinate the masonry, surrounding openings and wet-material repair questions.

The short answer

Do not seal a brick opening because water comes out during rain. In an identified drainage-type brick wall, a weep can be an intended outward exit; its appearance alone does not identify your wall or establish that it is working properly. Report unexplained or recurring water to qualified masonry/building-envelope help, especially if water also reaches the room. Keep clear of wet electricity, loose or falling masonry and unsafe ground; follow storm and emergency directions first. Ask what the opening and actual wall system are, what source remains unresolved and who handles any interior damage.

1. Rain crosses the outer brickSome water can reach the space behind the exterior masonry.

2. Cavity and flashing manage waterIn this identified design, water travels down to the collection and redirecting layer.

3. Weeps provide an outward exitA visible outlet does not certify an unknown wall or explain water reaching the room.

Conceptual flow for an identified drainage-type wall. This is not a wall section or construction detail.

Put safety and the repair contact before the opening

Follow local weather, flood and evacuation instructions. Stay away from floodwater, damaged electrical equipment, loose masonry and an area where material may fall. Call 911 for immediate danger, injury or trapped occupants. Do not approach a damaged facade, climb or enter a flooded area to see whether a hole is draining.

For active indoor entry or an unexplained recurring exterior condition, contact the building emergency contact or a qualified masonry/building-envelope professional experienced in water entry. Say where water is already visible and give access hazards first. Ask who can assess the wall together with any affected window, door or roof connection; a provider who replaces only a visible seal may not cover that whole question.

Use the ceiling, window-rain or basement-water response when those locations are affected. Keep away from wet outlets, lights and cords; obtain qualified electrical help for unsafe or uncertain isolation. CDC warns against operating electrical equipment while standing in water. No exterior-drainage explanation clears an unsafe room.

Why an identified brick weep can let rainwater out

Brick veneer is an outer brick layer. BIA’s Technical Note 7, printed November 2017, describes drainage-type walls that manage rain passing that outer layer: water travels down the cavity, reaches flashing and leaves through weeps. Flashing is the water-collecting and redirecting layer in that design. An outward exit can therefore be intentional rather than a hole that should automatically be filled.

PNNL’s brick-veneer description likewise treats the space behind the brick, flashing and outward exits as a connected system. BIA’s Builder Notes describes the same drainage principle. None of these explanations identifies an arbitrary gap, verifies concealed layers or proves that water reaching an interior finish is normal.

Ask the provider to identify the actual wall and opening from appropriate records and assessment. A brick-looking surface may be a different masonry or adhered-cladding system. Do not use the number, shape or spacing of visible holes—or the fact that one drips—as a household construction test.

Leave sealing, clearing and coating decisions with the actual assessment

BIA’s weep discussion addresses the risk of intended openings being sealed during later maintenance. Before accepting a proposal to fill a wet-looking gap, ask what establishes its purpose and how the actual drainage system will be preserved. A bead that hides an outlet is not evidence that the incoming water or concealed condition was corrected.

Do not insert wire or tools, pull a rope or insert, remove a cover, drill, chip mortar, excavate beside the wall or add caulk, foam, screens or coatings based on this guide. If an outlet is reported covered or obstructed, give that information to the qualified provider; do not turn it into an improvised clearing job or hose test.

A window-product drain, door sill gap and soil-retaining-wall drain are different assemblies. Use their established guides for those questions. An observation beside a window or above a roof does not establish which trade caused the problem; ask who will coordinate the unresolved connection.

Ask what the wall-water findings and proposed work actually establish

Use this original conversation table when arranging assessment or reviewing a repair scope. It keeps a possible intended outlet separate from an unidentified source, damaged materials and the work still needed. No flow amount or elapsed time in this guide establishes a normal limit.

Questions for water reported at a brick wall opening
What is knownQuestion to resolve
Wall and openingWhich wall type and opening are actually documented, and who confirms any unknown construction?
Exterior waterWhere was water first seen, what weather was already observed and what supports the proposed source explanation?
Water indoorsWho investigates the room and surrounding wall or opening, alongside the exterior drainage finding?
Possible coverageDoes an existing repair, finish or ground condition affect an intended outlet? Who establishes the appropriate work without guessing?
Connected detailsDoes the finding call for masonry, window, door or roof coordination, and who owns the handoff?
Safety and accessWho resolves loose material, structural concern, wet power or an unsafe inspection route before work proceeds?
CompletionWhat was corrected and checked, what remains unassessed and who handles wet materials and the next report?

Keep a short private wall-water record

Arrange urgent help first. Use only details already available safely and write “unknown” where needed. Keep addresses, access details and close photographs private; the free homeowner checklist can hold the next action, contact and follow-up date.

  • Affected building wall or separate retaining wall, and first visible location: ___.
  • Discovery time and rain or continuing flow already observed: ___.
  • Indoor water, staining or affected room reported separately: ___.
  • Electrical, loose-material, ground or access concerns: ___.
  • Existing construction, installer and previous repair records: ___.
  • Opening purpose, source finding and unknown areas stated by the provider: ___.
  • Proposed or completed work, drainage protection and verification: ___.
  • Separate wet-material contact, restrictions and next update: ___.

Example: exterior dripping and a stain near a window

Fictional example: a resident notices water below an exterior brick opening after rain from a safe indoor position. There is also a new stain at nearby interior trim. The resident reports both locations to the building contact and qualified water-entry provider without going outside, filling the opening or spraying the wall.

The provider is asked whether the exterior opening is an intended wall weep, a window-product feature or still unidentified, and who investigates the wet trim and connected wall. The private note keeps “exterior discharge” and “interior stain; source unconfirmed” in separate fields. It does not conclude that one observation explains the other.

When the rain stops, the source finding and material follow-up remain open until the responsible providers document them. An explanation that a wall has weeps is not, by itself, a completed investigation of the stain. This invented service conversation is not a diagnosis, a tested repair or a promised outcome.

Close the source, wall work and interior recovery separately

Ask for the actual source finding, the wall areas and connections assessed, the work performed and any remaining limitations. Request the specific completion check and instructions for renewed water, keeping temporary protection distinct from permanent correction. The repair-estimate guide can help clarify exclusions and responsibility.

PNNL’s retrofit discussion shows that concealed wall layers and damage can affect repair scope. That supports asking what was assessed behind the visible surface; it is not permission to open the wall yourself or proof that every wet wall needs the same removal work.

EPA advises fixing water problems promptly and drying items completely, with experienced help for significant or contaminated-water damage. Keep wet drywall or insulation assessment assigned where relevant. A dry-looking face, stopped drip, coated brick or finished sealant bead does not establish concealed drying, source correction or safe electrical reuse.

Keep the source and wall-type limits with the answer

BIA’s Technical Notes are written for fired clay or shale brick and warn against transferring their recommendations to other products. Technical Note 7 discusses design and detailing and leaves project decisions to the actual architect, engineer and owner. Its 2017 publication and older code references are not a current local code determination.

The PNNL page displays a June 13, 2017 update date. Its construction and retrofit details explain the principle; this guide does not adopt dimensions, spacing, material choices, a coating recipe or an installation sequence. Use the actual wall records, qualified assessment and applicable local requirements for the work.

Important: Editorially researched drainage and repair-planning guidance, not firsthand testing, a diagnosis, structural clearance or instructions to alter masonry, flashing, weeps, finishes or electrical equipment. The actual wall and opening must be established; urgent hazards and indoor water need their own response.

When to call a professional

Use emergency help for immediate danger and qualified electrical or structural help for wet power, loose or falling masonry, movement or unsafe access. For unexplained or recurring wall water, contact building management or qualified masonry/building-envelope water-entry help; coordinate window, door or roof expertise when findings require it. Ask who resolves the actual source and drainage, concealed materials, restrictions and completion checks.

Related guides

Sources

Free next step

Download the free seasonal maintenance checklist to record observations and follow-up tasks. See the seasonal maintenance routine for more context.

Affiliate disclosure

No affiliate links appear in this guide. If a reviewed recommendation is added, the disclosure will appear beside it.

Back to guide library